je to celkem skok kupředu, tak zakládám i nový topic...
https://www.dropbox.com/s/q55z87slyfu2l ... gq3015.zip
SP Flash Tool:
http://forum.xda-developers.com/showthr ... ?t=2650125
Devhost link: http://d-h.st/w6v
Mediafire: http://www.mediafire.com/download/aix6j ... 9.rar.html
Info lakhi: http://www.pandawillforum.com/showthrea ... 0&p=136780
Kód: Vybrat vše
Good news here I present Kitkat 4.4.2 Original stock ROM for all clones. Tested on my Ulefone U7. Working flawlessly. Note: 1 Luftco Cross A-one X, U7, Tronsmart T7, Orientphone are all same with just name changed so the ROM works on all these phones with same specifications. 2. ROM will install in Chinese language that you can change in language options later. 3. Use SP Flash tools 1352 or later. Procedure described below 1. Download and Extract ROM into new folder named Kitkat. 2. Download latest SP Tools and extract in SP Tools folder. 3. Enable USB Debugging from settings==>Developer options and Connect phone to PC with internet 'on' and let it install needed drivers automatically. Disconnect phone by remove USB option from PC. 4. Switch off phone, take out battery, SIM cards and SD card. 5. Note down IMIE for both SIM cards from back of phone under battery. 6. Now run flash_tool.exe from SP Tools folder. 7. Click Options==>Download==>Check DA DL All with Ckecksum and close it. 8. In the Smart phone flash tool action bar from Welcome, format, download, read back and memory test, select Download (Do not press download button yet). 9. Select download agent MTK_Allinone_DA.bin from SP Flash tools folder. 10. Select Scatter loading MT6592_Android_scatter.txt from Kitkat folder. Wait for 5-10 secs for loading all options. 11. Select Firmware Upgrade option from drop down menu. 12. Now click Download Button with Down Arrow. 13. Connect your phone to PC. Firmware upgrade will start and take about 3-5 mins. When finished a green Tick mark with OK will appear. 14. Disconnect phone. Insert SIM cards, SD Card, Battery and start with power on button. Wait for 2-3 minutes for first bootup. Change language from settings. 15. Enjoy a new phone. If any one finds trouble getting network connectivity due Invalid IMIE then do not panic and following simple proc will fix it. 1. From dialer keypad type *#06#. If IMIE is not shown or is Invalid then dial *#*#3646633#*#* to enter Engineer Mode. 2. In the Top Bar Click on Connectivity==>CDS Information==>Radio Information==>Phone 1 3. On top Click next to AT+ and delete + sign. Retype + sign. 4. Select AT+EGMR=1,7"". Between inverted commas, type IEMI no. for SIM one and select 'SEND AT COMMAND'. Once you get command sent. Reboot phone by power button on side. Repeat for Second SIM by selecting Phone 2 and AT+EGMR=1,10"" Command. Reboot again and you are good to go.
https://mega.co.nz/#!s4pTgJyQ!fTSOW1yti ... 0-Dv0o_oBM